Archive for the 'Disk Repair Tools' Category

Maxtor Firmware repair 2.0

Maxtor Firmware Repair 2.0 is a program  aiming at solution for typical firmware malfunction of Maxtor 541DX (2B020H1 2B010H1), which may manifest itself as follows:

1. HDD is not identified or identified by its factory alias “Maxtor Athena”;
2. HDD starts the motor and then hangs.

How does Maxtor Firmware Repair 2.0 work?

1. The restoration program will not overwrite the HDD data so it is applicable to data recovery.

2. It provides the users with a most friendly operation interface and it only takes you a few seconds to restore an HDD with typical firmware malfunction.

3. So, after you have this powerful freeware installed, all you have to do is to insert the bootable disk and have…

HDD Scan and Repair 3.0

Are you facing a scandisk on your HDD because there is some bad sectors?
Is it annoying and time-consuming? then you’ve come to the right place.

HDD Scan And Repair 3.0 is the only one known professional program which can scan HDD over 136 G directly that need not the support of computer mainboard with high speed. It can utmost afford 2000 G HDD in theory.

Notice: If you have recently installed Windows Service Pack 2 (SP2) you would be having problems with your SP2 after using HDD Scan And Repair 3.0 installation program to create the bootable floppy disk.

How does HDD Scan and Repair 3.0 work?

1. A breakthrough of this program is that, without depending on BIOS,…

Seagate Firmware Repair 5.0

Seagate Firmware Repair 5.0 is a demoware  aiming at one-key solution towards typical firmware malfunction of Seagate Barracuda VII drives, which may manifest itself as follows:
1. HDD is not identified or identified incorrectly;
2. HDD starts the motor and then hangs.

How does Seagate Firmware Repair Demo 5.0 work?

1.The restoration program will not destroy the HDD data so it is applicable to data recovery.

2.It provides the users with a most friendly operation interface. Powerful and easy in fixing HDD typical firmware malfunction: Just one click and your data and drive comes back (80% of corrupt Seagate drives are caused by typical malfunction).

3.Check HDD firmware: Powerful function that enables you to figure out the…

Bad Sectors Repair 2.0

Bad Sectors Repair 2.0 can add bad sectors of Maxtor 541DX(2B0X0H1) HDD into the factory defects list (P-LIST), up to 15,000 bad sectors can be added into the list at most.

How does Bad Sectosr Repair 2.0 work?

1. It is able to move defects from G-list to P-list, empty and reset both P-list and G-list, reset the HDD capacity and add your specific sector as defect into the P-list…

2. The HDD restored would work just as a brand-new HDD: There will be no bad sector,and it could be partitioned and formatted at your will.

3. So, after you have this powerful freeware installed, all you have to do is to insert the bootable disk and have your target…

Flash Data Recovery Tool: PC-3000 Flash

PC-3000 Flash Data Recovery PC-3000 Flash is a professional tool for recovering data from flash based storage devices like SD cards, USB sticks, etc.

PC-3000 is the product of years of development by the experts of ACE Laboratory Russia. It is capable of interfacing with NAND chips directly and reading the data, so you do not have to go through the complicated (and often impossible) process of repairing the controller board of the device.

Highlights of PC-3000 Flash:

  • Very easy to use. The operator does not have to be a data recovery expert.
  • Three recovery ’steps’. First is to physically remove the NAND chip(s) from its controller, second is to read the raw data off the chip(s), and third is

Two Useful Tools For Online/Remote Troubleshooting

Remote Troubleshooting Sometimes our customers need a online data recovery or remote PC troubleshooting. Here are two useful tools may help you, with a few simple steps, you’ll learn how to troubleshoot someone else’s computer remotely.

TeamViewer

Step 1. Visit the TeamViewer home page to begin troubleshooting. Once the page has opened, click the "Start Full Version-It’s Free" button to start the download. Click the "Save File" button located in the pop-up window. Open the TeamViewer application by double clicking the downloaded file. You’ll have two options to choose from when setting up the TeamViewer application. The first option will fully install the program on your computer system. If you’d rather not do this, select the second…

Samsung Auto Backup FAQS

Q.Samsung Auto Backup FAQS What is Samsung Auto Backup?
A.
Samsung Auto Backup is Bundled software that performs a backup of the PC data to Samsung External Hard Drive. Through the Real-Time Backup or Scheduled Backup, the data can be backed up safely to Samsung External Hard Drive.

When the backed up data are damaged due to a system error or user’s mistake, they can be checked/recovered through the Integrity Check. Also the original data that was stored in the PC can be conveniently recovered when damaged or lost.

Q. Cannot install Samsung Auto Backup.
A.
Check the system you want to install Samsung Auto Backup on meets the minimum system requirements specified in this manual.

Q. How do I perform